Features:
Rootstock and scion it is easy to match the U-cut,V-cut or Ω-cut,rapid healing Using easily and fastly. Grafting method than the traditional savings The time and effort Blade can be replaced Use the pruner to cut useless branches from the plant
How to use: Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant. Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only. Step 3: Place sterlizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions. Step 4: Use the pruner to cut useless branches from the plant. Step 5: The grafting tool with "V & U & Ω" blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.
Note: Keep out of reach of children Do not use on dry or old hard wood
1PCS 0.53Kg Plant Tying Tapetool
Feature:
Binding machine is only 0.53 kg, very convenient to take. Cost recovery very fast. One binding machine can save 3 labors Labor saving, it can bind 3-4 times more plant than by hand in a unit time. Time saving: it cost less time, so when farmers busy with the planting, we can have more time to do the other things like sprinkle. And we can also increase the plant area because of it's high efficiency. Steps of Operation: 1. Hold handgrip and press down with force, when you hear a voice of "da". the tape is hooked by hook, loose handgrip to take out the tape, pay attention taht you can't use an excessive force. 2. The branch of crop need to bind overlap from wire and other materials, and tie both them with the tape, and quickly press down the handgrip by force. 3. After cut the adhesive tape off you should loosen the handgrip quickly and make redundant small tape to spring out. 4. Attention: Tape bound should be parallel with nail groove. Maintenance Method: 1. If the tying hand machine of the blade is not able to cut the belt, please use a long flat nose plier to pull out the used blade, and change a new one. 2. When the hand tying machine of stitching needle is blocked, you can use nipper or small screw driver to get it out. (If 1 section break into 2 section, we also can use one by one section avoid be blocked.) 3. Add lubricant oil to every joint after tying hand machine are long time using.
Features:
Materil: PE Color:Red,Blue Size: 1.1cm *30m
10000pcs/lot Tape Tool Binder Nail Tapener
Description
Using zinc iron manufacture, not easy to rust; Excellent material, BuKa screw, no wear machine Products are delicate and cabinet, simple and convenient, easy to install. Features 1.Using the high quality steel material, having a strong penetrating power. 2.Easily to staple, saving of time and labor 3.The needle of the nail is sharp, with good stability. Material: Stainless Steel Size: Crown Width: 0.6cm Leg Length: 0.4cm Length:10.6CM Weight: 170g |